 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA Freescale Semiconductor, Inc. Order this document by MPC9109/D SEMICONDUCTOR TECHNICAL DATA Low Voltage 1:18 Clock Distribution Chip The MPC9109 is a 1:18 low voltage clock distribution chip with 2.5V or 3.3V LVCMOS output capabilities. The device features the capability to select either a differential LVPECL or an LVCMOS compatible input. The 18 outputs are 2.5V or 3.3V LVCMOS compatible and feature the drive strength to drive 50 series or parallel terminated transmission lines. With output-to-output skews of 200ps, the MPC9109 is ideal as a clock distribution chip for the most demanding of synchronous systems. The 2.5V outputs also make the device ideal for supplying clocks for a high performance Pentium IITM microprocessor based design. For a higher performance version of the 9109 refer to the MPC940L data sheet. MPC9109 LOW VOLTAGE 1:18 CLOCK DISTRIBUTION CHIP Freescale Semiconductor, Inc... * * * * * * LVPECL or LVCMOS Clock Input 2.5V LVCMOS Outputs for Pentium II Microprocessor Support 200ps Maximum Output-to-Output Skew @ 3.3V Output Maximum Output Frequency of 250MHz @ 3.3V Core 32-Lead QFP Packaging Dual or Single Supply Device: * Dual VCC Supply Voltage, 3.3V Core and 2.5V Output * Single 3.3V VCC Supply Voltage for 3.3V Outputs * Single 2.5V VCC Supply Voltage for 2.5V I/O FA SUFFIX 32-LEAD QFP PACKAGE CASE 873A-02 With a low output impedance (20), in both the HIGH and LOW logic states, the output buffers of the MPC9109 are ideal for driving series terminated transmission lines. With a 20 output impedance the 9109 has the capability of driving two series terminated lines from each output. This gives the device an effective fanout of 1:36. If a lower output impedance is desired please see the MPC942 data sheet. If better performance is desired please see the MPC940L data sheet. The differential LVPECL inputs of the MPC9109 allow the device to interface directly with a LVPECL fanout buffer like the MC100EP111 to build very wide clock fanout trees or to couple to a high frequency clock source. The LVCMOS input provides a more standard interface for applications requiring only a single clock distribution chip at relatively low frequencies. In addition, the two clock sources can be used to provide for a test clock interface as well as the primary system clock. A logic HIGH on the LVCMOS_CLK_Sel pin will select the LVCMOS level clock input. All inputs of the MPC9109 have internal pullup/pulldown resistor so they can be left open if unused. The MPC9109 is a single or dual supply device. The device power supply offers a high degree of flexibility. The device can operate with a 3.3V core and 3.3V output, a 3.3V core and 2.5V outputs as well as a 2.5V core and 2.5V outputs. The 32-lead QFP package was chosen to optimize performance, board space and cost of the device. The 32-lead TQFP has a 7x7mm body size with a conservative 0.8mm pin spacing. Pentium II is a trademark of Intel Corporation. 3/99 (c) Motorola, Inc. 1999 For More Information On This REV 1.0 Product, 1 Go to: www.freescale.com Freescale Semiconductor, Inc. MPC9109 LOGIC DIAGRAM PECL_CLK PECL_CLK LVCMOS_CLK LVCMOS_CLK_Sel (Internal Pulldown) 0 1 16 Q1-Q16 Q17 Q0 Pinout: 32-Lead TQFP (Top View) Freescale Semiconductor, Inc... VCCI 24 GNDO Q5 Q4 Q3 VCCO Q2 Q1 Q0 25 26 27 28 23 22 21 20 19 18 GND 17 16 15 14 13 VCCO Q12 Q10 Q11 Q6 Q7 Q8 Q9 FUNCTION TABLE Q13 Q14 GNDO Q15 LVCMOS_CLK_Sel 0 1 Input PECL_CLK LVCMOS_CLK MPC9109 29 30 31 32 1 2 3 4 5 6 7 8 12 11 10 9 POWER SUPPLY VOLTAGES Q16 Q17 Supply Pin VCCI VCCO Voltage Level 2.5V or 3.3V 5% 2.5V or 3.3V 5% LVCMOS_CLK_Sel LVCMOS_CLK PECL_CLK PECL_CLK GNDI VCCI GNDO MOTOROLA For More Information On This Product, 2 Go to: www.freescale.com VCCO ECLinPS and ECLinPS Lite DL140 -- Rev 3 Freescale Semiconductor, Inc. MPC9109 ABSOLUTE MAXIMUM RATINGS* Symbol VCC VI IIN TStor Supply Voltage Input Voltage Input Current Storage Temperature Range -40 Parameter Min -0.3 -0.3 Max 3.6 VCC + 0.3 20 125 Unit V V mA C * Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. DC CHARACTERISTICS (TA = 0 to 70C, VCCI = 3.3V 5%; VCCO = 3.3V 5%) Symbol VIH Characteristic Input HIGH Voltage Input LOW Voltage Peak-to-Peak Input Voltage Common Mode Range Output HIGH Voltage Output LOW Voltage Input Current Input Capacitance Power Dissipation Capacitance Output Impedance Maximum Quiescent Supply Current 18 4.0 10 23 0.5 28 CMOS_CLK CMOS_CLK PECL_CLK PECL_CLK 500 VCC-1.4 2.4 0.5 200 Min 2.4 Typ Max VCCI 0.8 1000 VCC-0.6 Unit V V mV V V V A pF pF per output IOH = -20mA IOH = 20mA Condition Freescale Semiconductor, Inc... VIL VPP VCMR VOH VOL IIN CIN Cpd ZOUT ICC W mA AC CHARACTERISTICS (TA = 0 to 70C, VCCI = 3.3V 5%; VCCO = 3.3V 5%) Symbol Fmax tPLH tsk(o) tsk(pr) dt Characteristic Maximum Input Frequency Propagation Delay Output-to-Output Skew Part-to-Part Skew Duty Cycle PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK 45 1.8 1.6 2.8 2.5 Min Typ Max 250 3.8 3.3 200 200 2.0 1.7 55 1.3 Unit MHz ns ps ns % ns Note 1 Note 1. Note 1. Note 1. Note 1. Condition tr, tf Output Rise/Fall Time 0.1 1. Guaranteed by statistical analysis, not 100% tested in production. ECLinPS and ECLinPS Lite DL140 -- Rev 3 For More Information On This Product, 3 Go to: www.freescale.com MOTOROLA Freescale Semiconductor, Inc. MPC9109 ABSOLUTE MAXIMUM RATINGS* Symbol VCC VI IIN TStor Supply Voltage Input Voltage Input Current Storage Temperature Range -40 Parameter Min -0.3 -0.3 Max 3.6 VCC + 0.3 20 125 Unit V V mA C * Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. DC CHARACTERISTICS (TA = 0 to 70C, VCCI = 3.3V 5%; VCCO = 2.5V 5%) Symbol VIH Characteristic Input HIGH Voltage Input LOW Voltage Peak-to-Peak Input Voltage Common Mode Range Output HIGH Voltage Output LOW Voltage Input Current Input Capacitance Power Dissipation Capacitance Output Impedance Maximum Quiescent Supply Current 4.0 10 23 0.5 CMOS_CLK CMOS_CLK PECL_CLK PECL_CLK 500 VCC-1.4 1.8 0.5 200 Min 2.4 Typ Max VCCI 0.8 1000 VCC-0.6 Unit V V mV V V V A pF pF per output IOH = -20mA IOH = 20mA Condition Freescale Semiconductor, Inc... VIL VPP VCMR VOH VOL IIN CIN Cpd ZOUT ICC W mA AC CHARACTERISTICS (TA = 0 to 70C, VCCI = 3.3V 5%; VCCO = 2.5V 5%) Symbol Fmax tPLH tsk(o) tsk(pr) dt Characteristic Maximum Input Frequency Propagation Delay Output-to-Output Skew Part-to-Part Skew Duty Cycle PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK 45 1.8 1.6 2.8 2.5 Min Typ Max 250 3.9 3.4 250 250 2.1 1.8 55 1.3 Unit MHz ns ps ns % ns Note 1 Note 1. Note 1. Note 1. Note 1. Condition tr, tf Output Rise/Fall Time 0.1 1. Guaranteed by statistical analysis, not 100% tested in production. MOTOROLA For More Information On This Product, 4 Go to: www.freescale.com ECLinPS and ECLinPS Lite DL140 -- Rev 3 Freescale Semiconductor, Inc. MPC9109 ABSOLUTE MAXIMUM RATINGS* Symbol VCC VI IIN TStor Supply Voltage Input Voltage Input Current Storage Temperature Range -40 Parameter Min -0.3 -0.3 Max 3.6 VCC + 0.3 20 125 Unit V V mA C * Absolute maximum continuous ratings are those values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation under absolute-maximum-rated conditions is not implied. DC CHARACTERISTICS (TA = 0 to 70C, VCCI = 2.5V 5%; VCCO = 2.5V 5%) Symbol VIH Characteristic Input HIGH Voltage Input LOW Voltage Peak-to-Peak Input Voltage Common Mode Range Output HIGH Voltage Output LOW Voltage Input Current Input Capacitance Power Dissipation Capacitance Output Impedance Maximum Quiescent Supply Current 18 4.0 10 23 0.5 28 CMOS_CLK CMOS_CLK PECL_CLK PECL_CLK 500 VCC-1.0 1.8 0.5 200 Min 2.0 Typ Max VCCI 0.8 1000 VCC-0.6 Unit V V mV V V V A pF pF per output IOH = -12mA IOH = 12mA Condition Freescale Semiconductor, Inc... VIL VPP VCMR VOH VOL IIN CIN Cpd ZOUT ICC W mA AC CHARACTERISTICS (TA = 0 to 70C, VCCI = 2.5V 5%; VCCO = 2.5V 5%) Symbol Fmax tPLH tsk(o) tsk(pr) dt Characteristic Maximum Input Frequency Propagation Delay Output-to-Output Skew Part-to-Part Skew Duty Cycle PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK PECL_CLK CMOS_CLK 45 2.2 2.0 2.8 2.5 Min Typ Max 200 4.9 4.2 250 250 2.7 2.2 55 1.3 Unit MHz ns ps ns % ns Note 1 Note 1. Note 1. Note 1. Note 1. Condition tr, tf Output Rise/Fall Time 0.1 1. Guaranteed by statistical analysis, not 100% tested in production. ECLinPS and ECLinPS Lite DL140 -- Rev 3 For More Information On This Product, 5 Go to: www.freescale.com MOTOROLA Freescale Semiconductor, Inc. MPC9109 OUTLINE DIMENSIONS FA SUFFIX QFP PACKAGE CASE 873A-02 ISSUE A A A1 32 25 4X 0.20 (0.008) AB T-U Z 1 -T- B -U- V P AE Freescale Semiconductor, Inc... B1 8 DETAIL Y 17 V1 AE DETAIL Y 9 -Z- 9 S1 S 4X 0.20 (0.008) AC T-U Z G -AB- SEATING PLANE DETAIL AD -AC- BASE METAL N F 8X D M_ R 0.20 (0.008) M AC T-U Z 0.10 (0.004) AC NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DATUM PLANE -AB- IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE. 4. DATUMS -T-, -U-, AND -Z- TO BE DETERMINED AT DATUM PLANE -AB-. 5. DIMENSIONS S AND V TO BE DETERMINED AT SEATING PLANE -AC-. 6. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.250 (0.010) PER SIDE. DIMENSIONS A AND B DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE -AB-. 7. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. DAMBAR PROTRUSION SHALL NOT CAUSE THE D DIMENSION TO EXCEED 0.520 (0.020). 8. MINIMUM SOLDER PLATE THICKNESS SHALL BE 0.0076 (0.0003). 9. EXACT SHAPE OF EACH CORNER MAY VARY FROM DEPICTION. MILLIMETERS MIN MAX 7.000 BSC 3.500 BSC 7.000 BSC 3.500 BSC 1.400 1.600 0.300 0.450 1.350 1.450 0.300 0.400 0.800 BSC 0.050 0.150 0.090 0.200 0.500 0.700 12_ REF 0.090 0.160 0.400 BSC 1_ 5_ 0.150 0.250 9.000 BSC 4.500 BSC 9.000 BSC 4.500 BSC 0.200 REF 1.000 REF INCHES MIN MAX 0.276 BSC 0.138 BSC 0.276 BSC 0.138 BSC 0.055 0.063 0.012 0.018 0.053 0.057 0.012 0.016 0.031 BSC 0.002 0.006 0.004 0.008 0.020 0.028 12_ REF 0.004 0.006 0.016 BSC 1_ 5_ 0.006 0.010 0.354 BSC 0.177 BSC 0.354 BSC 0.177 BSC 0.008 REF 0.039 REF J CE SECTION AE-AE X DETAIL AD MOTOROLA For More Information On This Product, 6 Go to: www.freescale.com GAUGE PLANE 0.250 (0.010) H W K Q_ DIM A A1 B B1 C D E F G H J K M N P Q R S S1 V V1 W X ECLinPS and ECLinPS Lite DL140 -- Rev 3 -T-, -U-, -Z- EE EE EE Freescale Semiconductor, Inc. MPC9109 NOTES Freescale Semiconductor, Inc... ECLinPS and ECLinPS Lite DL140 -- Rev 3 For More Information On This Product, 7 Go to: www.freescale.com MOTOROLA Freescale Semiconductor, Inc. MPC9109 Freescale Semiconductor, Inc... Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488 MOTOROLA For More Information On This Product, 8 Go to: www.freescale.com MPC9109/D ECLinPS and ECLinPS Lite DL140 -- Rev 3 |
Price & Availability of MPC9109
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |